Engine Starting
At Avalon Main, engine starting is not permitted without:

1. Clearance from the Organiser’s marshal attending the aircraft;
2. The aircraft’s crew chief – where applicable; and
3. Radio contact with Airshow Ground on the “Apron Frequency”

At Avalon East, engine starting procedure is to follow normal starting procedures but especial care is to be taken to ensure persons on the movement area are well clear.

Engine Run-ups
Maintenance engine run-ups are to be conducted in the area previously designated by organiser and cleared through the Airshow ground control center

Pre-takeoff engine run-ups are to be conducted in the area designated by Air Traffic Control; for runway 18L/36R expect at the holding point or on the runway, for runway 18R/36L expect the run-up area west of runway 18L/36R.

For further information and enquiries contact Aircraft Operations Administration
(03) 5282 0543 or Email: aircraftoperations@amda.com.au